This is the 1/10 scale, electric powered, radio controlled, 4 wheel drive
Team Associated TC4 Team Touring Car kit. _
FEATURES: Chassis: Black nylon construction that has been redesigned to move the batteries closer to the centerline of the car allowing for quicker directional transitions. The chassis is also narrower to provide more side-to-side roll clearance Drive: Four wheel drive, shaft driven with a new 6061 T6 blue anodized aluminum drive shaft that fits in stronger nylon drive cups
Ball Bearings: Full set of rubber/teflon sealed
Shocks: Molded composite threaded body, oil filled
Gearbox: Closed front and rear
Differentials: Ball differential in the front and rear
Transmission: Single speed transmission
Tires: 24mm, v-tread style (ASCC2405)
Wheels: 24mm, white aero dish touring car wheels (ASCC3991)
Bumpers: Double-decked impact-resistant plastic and lightweight foam bumper system adopted from the Nitro TC3 Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle
Steering Tie Rods: Adjustable turnbuckles, caster/toe-in refers to the angle at which the wheels point inward as viwed from above
Steering: Ball bearing supported, dual-bellcrank/rack configuration
Servo Saver: Spring loaded
New 3 bolt spur gear mount with 6 mounting positions fits most gears
Inner hinge pins are now larger in diameter and 40% stronger
Moulded composite wheel hex drives now feature a "star drive" shape which allows more precise fit with most standard touring car wheels
Inline motor mounting system with all-new aluminum motor mount for greater motor stability and acts as a heat sink keeping motor cool
Redesigned shock towers are stronger and have 4 upper shock mounting hole options
The blue aluminum MIP CVD's are now thicker and 3 times stronger than the ones on the TC3
INCLUDES: TC4 rolling chassis with oil-filled shocks, tires, wheels, foam inserts, 72 tooth 48 pitch Kimbro spur gear, MIP CVD's, full ball bearing set, Associated logo decal sheet, and instructions _
REQUIRES: Radio: 2-Channel with 1 servo for steering
Radio Batteries: (8) AA size
Speed Control: Electronic of modelers choice
Motor: Stock or modified of modeler's choice
Battery: 6 or 7 cell battery (stick or side-by-side)
Charger: AC/DC timed or peak for 6-cell battery
Body: 190mm touring car body
Misc. Items: Building and track equipment
SPECS: VEHICLE-
Length: 14.68" (373mm) without body or foam bumper
Rear track: 7.48" (190mm)
Front track: 7.48" (190mm)
Weight: 48.5oz (1375 grams) with electrics and no body
Wheelbase: 10.19" (259mm)
Internal gear ratio: 2.50:1
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
(12) 3/16x3/8 wheels and transmission use 6-DTXC1423
(4) 3/16x5/16 transmission use 2-DTXC1413
(2) 3/8x5/8 outdrives use 2-DTXC1437
(5) 4x8x2mm steering rack use 2-ASCC3916

For the stock 72 tooth spur gear the following are suggestions for a starting pinion gear: 24-degree stock (torque based) 28 tooth pinion
24-degree stock (rpm based) 27 tooth pinion
19 turn spec 30 tooth pinion
12 turn (big track) 25 tooth pinion
12 turn modified 24 tooth pinion
11 turn modified 22 tooth pinion
10 turn modified 21 tooth pinion
9 turn modified 20 tooth pinion
8 turn modified 19 tooth pinion