Associated Factory Team RC10GT2 Off-Road Truck Kit.
Contains the following Factory Team Hop-ups;
Finned Engine Mount
PTFE-coated Threaded Shock Bodies with Collars
Unobtainium Coated Shock Shaft
Blue Aluminum Shock Bushings, Bulkhead, Hinge Pin Brace, Chassis Brace
Black Hard Anodized 6061-T6 Aluminum Chassis
CVA Joint with Quick Change Hubs
4 Steering Ball Bearings
Blue Titanium Turnbuckles
Blue Aluminum Rod-End Pivot Balls
Polished Blue Anodized Tuned Pipe
Blue Aluminum Servo Mounts and Flywheel
Light Outdrives
FEATURES: Chassis: Anodized 6061 aluminum with molded front kickup and modular radio tray, dual deck layout, blue aluminum front bulkhead
Drive: Rear wheel drive
Drive Shafts: Dogbones
Exhaust: Blue anodized tuned muffler - ASCG1774
Fuel Tank: 2.8oz (82cc) flip top cap - ASCC7899
Clutch: Large diameter 2-shoe for SG type crankshafts
Transmission: Single-speed, 4.09:1 ratio
Shocks: Four oil-filled, with coil-over springs, PTFE coated
Main Gear: 54 tooth - ASCC7955
Receiver Box: Sealed - ASCC7896
Differential: Ball diff
Brakes: Free floating disc
Tires: Front Proline Edge M3 2.2" diameter 2" wide - PROC8097
Tires: Rear Proline Bowtie M3 2.2" diameter 2.0" wide - ASCC7879
Wheels: 2.2" diameter, 2" wide - ASCC7846 front - ASCC7980 rear with Posi-Lock quick change rear wheel system with five-lug self- aligning design for fast pit stops without having to worry about lining up the wheel onto a hex or drive pin. Posi-Lock quick change system is lightweight for reduced unsprung weight and rotating mass
Body: Clear untrimmed Associated Interceptor Truggy - ASCC7992
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Steering: Dual ball bearing, dual bell-crank with adjustable servo saver, heavy duty steering blocks
Turnbuckles: Factory Team, blue anodized titanium
INCLUDES: Associated Factory Team RC10GT2 Off-Road Truck Kit with oil-filled shocks, tires, wheels, body, decals, 20 tooth bell, 54 tooth spur, hardware and illustrated building instructions.
REQUIRES: Radio: 2-channel with 2 standard servos
Transmitter Batteries: Eight AA size
Receiver Battery: 5-Cell Hump Pack - DTXM2010
Engine: .12-.15 cu in (2.0 -2.4 cc) non pull start with SG (pilot) style crankshaft and rotary carburetor (standard crankshafts will fit using #2312 (ASCC4312) optional Clutch Nut)
Glow Starter: 1.2 volt
Paint: Polycarbonate safe for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane, 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content required for optimum performance and maximum engine life. In the past, the conventional lubricant content used in fuel was 18%. But with new advanced technologies, fuels like Red Alert and O'Donnell for example, have a better quality of lubricants even though the percentages of lubricant content are lower. These high-tech lubricants provide exceptional cooling and protection.
SPECS: Vehicle-
Length: 16.5" (420mm)
Width: 13" (330mm)
Height: 6" (152mm)
Weight: 4.1 lbs (1850g)
Wheelbase: 11.2" (285mm) adjustable
Tread- Front- 11" (280mm) Rear- 10-7/16" (276mm)
Front Track: 12.75" (325mm)
Rear Track: 12.5" (320mm)
Ground Clearance: 1.5" (37mm)
Gear Ratio: 4.09:1
Tires- Front: 2.2" x 2"
Rear: 2.2" x 2"
Body-
Width: 6.5" (165mm)
Height: 4.25" (108mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
1 5x10 Inside Clutch Bell ASCC4320 1
1 5x9FL Outside Clutch Bell ASCC4320 1
4 3/16x3/8 Front Wheels DTXC1423 2
2 3/16x3/8 Inside Rear Hub DTXC1423 1
2 .187x.500 Outside Rear Hub ASCC7935 2
2 3/8x5x8 Rear Diff Outdrives DTXC1437 1
2 5/32x5/16 Diff Gear DTXC1411 1
2 3/16x3/8 Idler Gear DTXC1423 1
2 3/16x5/16 Transmission Shaft DTXC1423 1
Steering Bearing Set ASCC7889 1
For a high performance engine set-up from O.S. Max, the .12TZ(P) T3 (OSMG2019) and Tuned Pipe can be used.
KIT FEATURES ALUMINUM CHASSIS, OIL SHOCKS, DISH WHEELS, CLEAR BODY, DECALS, PRO LINE M3 COMPOUND TIRES, AND INSTRUCTION MANUAL. KIT REQUIRES A .12-.15 ENGINE WITH ROTARY CARB AND SG CRANK, 2 CHANNEL RADIO W/ 2 STANDARD SERVOS, RX BATTERY, GLOW HEATER, STARTER BOX, FUEL, 8 AA BATTERIES, BODY SCISSORS AND PAINT FOR THE BODY.
