This is the radio controlled, glow powered, Almost-Ready-to-Fly,
Carl Goldberg Tiger 1.20 Sport Airplane
Recommended for modelers with trainer airplane experience and also who have safely flown/landed .40 size low wing planes.
FEATURES: Construction: Laser cut balsa and plywood, jig built
Wings: All wood, built up with aluminum joiner tube
Covering: High quality heat-shrink, color scheme is White with Orange, Red and Yellow accents
Radio Compartment: Plywood reinforced, accessible over wing
Canopy: Tinted
Landing Gear: Tricycle style .20" (5mm) diameter wire pre-mounted gear blocks for easy conversion to tail dragger
Wheels: Three foam 3.25" (82mm) diameter
Aileron Control: Dual servo aileron and flap control
Tail Section: Includes flying wires and pre-mounted gear blocks for easy conversion to optional tail-dragger configuration
Fuel Tank: 22oz (650cc) approximate
Engine Mount: 2-piece composite construction
Building Time: Ready to fly in several hours
INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, .20" (5mm) tricycle landing gear, 3.25" (82mm) main wheels, engine mount, fuel tank, wood servo trays, hardware package and photo- illustrated instructions
REQUIRES: Engine: .75 - 1.08 cu in (12 - 18 cc) 2-stroke OR .91 - 1.20 (15 - 20 cc) 4-stroke
Muffler: Sports-style supplied with engine, engine mounts in an upright position)
Radio: 5-Channel
Servos: 8-Standard (2-Aileron, 2-Flap, 2-Elevator, 1-Throttle, 1-Rudder) 6" (152mm) Servo Extensions: Two for flaps/ailerons 18" (457mm) Servo Extension: Two for flaps/ailerons
Y-Harness: For aileron servos
Misc. Items: Glow plug, +" foam rubber padding, medium fuel tubing, fuel filter, propeller, building and field equipment
SPECS: Wingspan: 80" (2032mm)
Wing Area: 1143 sq in (73.84 sq dm)
Weight: 10.5 - 11.5lb (4763 - 5216g)
Length: 72" (1829mm)
Airfoil: Fully-symmetrical, low-wing configuration