This is the 1/8 scale radio controlled, glow powered, Associated Factory Team RC8T Truggy Kit.
For modelers 14 years of age and older.
FEATURES: Chassis: 0.12" (3mm) thick machined 7075 hard coated aluminum construction with Factory Team chassis braces with integrated center stiffener that maintains chassis integrity Drive: Four wheel shaft
Ball Bearings: Full set, rubber sealed
Differentials: Pre-assembled two-piece split-center mount for easy access to center diff, steel planetary gears
Shocks: Factory Team Big Bore oil filled, hard coated aluminum bodied with 4mm gold shock shafts and 16mm six hole pistons for maximum smoothness
Shock Towers: 0.16" (4mm) woven carbon fiber
Spur Gear: 54 tooth
Brake: FFC Free Float Caliper system eliminates unwanted brake drag during throttle
Wheels: LRP truggy wheels, white in color 2.2"(56mm) wide, 3.8" (96mm) diameter, 17mm hex
Wheel Hexes: Blue aluminum with captured drive pins and nyloc wheel nuts
Clutch: Three shoe aluminum, high torque
Clutch Bell: 14 tooth steel
Fuel Tank: Anti foaming, easily removed with two clips
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Suspension: Fully adjustable, full CVAs with captured CVA pins and Factory Team blue titanium turnbuckles
Steering: Bell crank with servo saver
INCLUDES: Associated Factory Team RC8T Truggy Kit, 54 tooth spur gear, 14 tooth steel clutch bell, oil filled shocks, wheels, illustrated instruction manual, bottle of 50 weight shock oil, body and decals
REQUIRES: Radio: 2-Channel with 2 Servos
Receiver Battery: 4.8 - 6.0V 5-cell flat or hump pack AA Batteries: Eight for transmitter
Engine: .21 or .28 cu in rear-exhaust, slide valve carb
Glow Starter: 1.2 volt
Tires: 1/8 scale truggy
Paint: Lexan specific spray or brush-on
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15% nitromethane
Most of the fuels we carry meet or exceed the lubricant content required for optimum performance and maximum engine life. In the past, the conventional lubricant content used in fuel was 18%. But with new advanced technologies, fuels like Red Alert and O'Donnell for example, have a better quality of lubricants even though the percentages of lubricant content are lower. These high-tech lubricants provide exceptional cooling and protection.
SPECS: Length: 22.5" (571.5mm)
Width: 16.5" (419mm)
Weight: 8.7lb (3946g) without receiver pack or body
Wheelbase: 14.8" (375mm)
Gear Ratio: 4.30:1
Body-
Length: 19.3" (490mm)
Width: 7.9" (200mm) ahead of rear wheels, widest point
7.3" (185mm) ahead of front wheels, narrowest point
Height: 5.1" (130mm)
COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set
4 15x21mm Front Hubs 2 ASCC6862
4 8x16mm Front Hubs 2 DTXC1585
4 15x21mm Rear Hubs 2 ASCC6862
4 8x16mm Rear Hubs 2 DTXC1585
2 5x10mm Clutch 1 DTXC1535
3 8x16mm Fr, Rear & Center Diffs 2 DTXC1585
2 8x16mm Front Gearbox 1 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585